|Title||DESIGN AND ANALYSIS OF ADAPTIVE AND RECONFIGURABLE ANTENNAS FOR WIRELESS COMMUNICATION |
|Author||Ali, Maha Abdelmoneim Mohamed|
|Keywords||Dissertations, Academic -- Engineering and Computer Science|
Engineering and Computer Science -- Dissertations, Academic
|Abstract||Modern radar and communication systems have experienced a tremendous increase in the number of antennas onboard, on the ground, and in orbital space. This places a burden due to the confined volume and limited weight requirements especially in space applications. The reconfigurable antenna is a promising and exciting new type of antenna, where through the use of appropriate switches the antenna can be structurally reconfigured, to maintain the elements near their resonant dimensions for several frequency bands. This increases the bandwidth of the antenna dramatically, which enables the use of one antenna for several applications. Four novel reconfigurable antenna elements were designed to work at 2.45 GHz and at 5.78 GHz, to cover the transition period when wireless communication will shift to the 5.78 GHz band.
The four elements designed are: the reconfigurable Yagi, the reconfigurable corner-fed triangular loop antenna, the reconfigurable center-fed equilateral triangular loop antenna and the reconfigurable rectangular-spiral antenna. None of these antennas have been reported in the literature. Simulation results for all four antennas were obtained using IE3D. Fabrication and measurements for the Yagi antenna was done and the measured results agree with simulations. All four antennas have very good performance with respect to the 3dB beamwidth and directivity. However the reconfigurable rectangular-spiral antenna is the most compact in size among all four antennas. It is (20 mm x 20 mm) in size. At 2.45 GHz it has a 3dB beamwidth of 87° and directivity of 6.47dB. As for the 5.78GHz frequency the 3dB beamwidth is 82.5° and the directivity is 7.16dB. This dissertation also introduces the use of reconfigurable antenna elements in adaptive arrays.
An adaptive array that can null interference and direct its main lobe to the desired signal while being reconfigurable to maintain functionality at several frequency bands has the potential to revolutionize wireless communications in the future. Through several examples, at both the design frequencies, it is shown that the reconfigurable and adaptive antenna arrays are successful in nulling noises incident on the array. These examples illustrate how reconfigurable elements and adaptive arrays can be combined very beneficially for use in wireless communication systems. |
|Publisher||University of Central Florida |
|Degree Discipline||School of Electrical Engineering and Computer Science|
|Degree Grantor||Engineering and Computer Science|
|Degree Program||Electrical Engineering and Computer Science|
|Graduation Date||2004-05-01 |
|Access Level||Public - Allow Worldwide Access|
|Release Date||2005-07-17 |
|Repository Collection||Electronic Theses and Dissertations|
|Access Link||http://purl.fcla.edu/fcla/etd/CFE0000003 |